Welcome
Welcome to Network Machinery Ltd, incorporating Network Fasteners Ltd. We are the UK agents for the market leading fastening system requiring no pre-drilled holes in the base material generally referred to as self piercing rivets/ blind rivets and also marking tools.
Full information about the products available can be found on our website, with a summary below.
If you have any questions, please do not hesitate to contact us and we will be happy to help.
Download Brochure (PDF)
Metal Tacks
Metal-Tack fasteners were specifically developed to fasten light weight parts such as nameplates and wiring clips to heavier metal products such as pumps, valves and machinery.
Tack Mounts
"Nail" Cable Tie Mounts to Metal. Now you can quickly and permanently fasten Cable Tie Mounts to metal without drilling or any other surface preparation.
Punch Pins
Fasten to Sheet Metal... without drilling - Now you can fasten light loads to sheet metal in less time than it takes to drill a hole.
Twist Tacks
Fasten to Steel Tubing or Aluminum Extrusions... Without Drilling. Fastening takes place when the knurled section of the fastener engages the base metal. The Twist-Tack is a self-piercing, one-step metal fastener.
Therm Drill
A combination of drilling and forming, using the Thermdrill tools not only produces a precision hole without cutting, but also the displaced material is used at the same time for producing a bushing hole – entirely without the use of additional materials!
Scribe Marker
The RapidMark Scribe Marker creates permanent markings using a combination of material compaction and displacement. The stylus we have specially developed creates an engraving effect similar to that derived from rolling.